The publications of the members of the research group.
2022
Iannone, Marco; Caccavo, Diego; Barba, Anna Angela; Lamberti, Gaetano
A low-cost push–pull syringe pump for continuous flow applications Journal Article
In: HardwareX, vol. 11, no. e00295, 2022, ISSN: 24680672.
Abstract | Links | BibTeX | Tags: 3D-printing, Continuous flow, Dual syringe pump, Push–pull
@article{Iannone2022b,
title = {A low-cost push\textendashpull syringe pump for continuous flow applications},
author = {Marco Iannone and Diego Caccavo and Anna Angela Barba and Gaetano Lamberti},
url = {https://www.scopus.com/inward/record.uri?eid=2-s2.0-85126485889\&doi=10.1016%2fj.ohx.2022.e00295\&partnerID=40\&md5=dc11ca55d5dc7a36fb1415ec58406b11},
doi = {10.1016/j.ohx.2022.e00295},
issn = {24680672},
year = {2022},
date = {2022-04-11},
journal = {HardwareX},
volume = {11},
number = {e00295},
abstract = {Syringe pumps are very useful tools to ensure a constant and pulsation-free flow rate, however usability is limited to batch processes. This article shows an open-source method for manufacturing a push pull syringe pump, valid for continuous processes, easy to build, low-cost and programmable. The push-pull syringe pump (PPSP) is driven by an Arduino nano ATmega328P which controls a NEMA 17 in microstepping via the A4988 stepper driver. The Push-Pull Syringe Pump setup is configurable by means of a digital encoder and an oled screen programmed using C ++. A PCB was designed and built to facilitate the assembly of the device. The continuous flow is guaranteed by four non-return valves and a dampener, which has been sized and optimized for use on this device. Finally, tests were carried out to evaluate the flow rates and the linearity of the flow. The device is achievable with a cost of less than 100 €. },
keywords = {3D-printing, Continuous flow, Dual syringe pump, Push\textendashpull},
pubstate = {published},
tppubtype = {article}
}
Syringe pumps are very useful tools to ensure a constant and pulsation-free flow rate, however usability is limited to batch processes. This article shows an open-source method for manufacturing a push pull syringe pump, valid for continuous processes, easy to build, low-cost and programmable. The push-pull syringe pump (PPSP) is driven by an Arduino nano ATmega328P which controls a NEMA 17 in microstepping via the A4988 stepper driver. The Push-Pull Syringe Pump setup is configurable by means of a digital encoder and an oled screen programmed using C ++. A PCB was designed and built to facilitate the assembly of the device. The continuous flow is guaranteed by four non-return valves and a dampener, which has been sized and optimized for use on this device. Finally, tests were carried out to evaluate the flow rates and the linearity of the flow. The device is achievable with a cost of less than 100 €.